You can free download part of practice questions and answers about Microsoft certification MB7-514 exam to test our quality. ITCertKing can help you 100% pass Microsoft certification MB7-514 exam, and if you carelessly fail to pass Microsoft certification MB7-514 exam, we will guarantee a full refund for you.
The talent is everywhere in modern society. This is doubly true for IT field. With the popularity of the computer, hardly anyone can't use a computer. Working in the IT industry, don't you feel pressure? Educational level is not representative of your strength. Education is just a ticket, however really keeping your status is your strength. As IT staff, how to cultivate your strength? It is a good choice to take IT certification test which can not only help you master more skills, also can get the certificate to prove your ability. Do you want to take Microsoft MB7-514 exam that is very popular in recent?
ITCertKing is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need ITCertKing's Microsoft MB7-514 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the ITCertKing Microsoft MB7-514 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.
Don't waste much more time on preparing for a test. Hurry to purchase ITCertKing Microsoft MB7-514 certification training dumps. With the exam dumps, you will know how to effectively prepare for your exam. This is precious tool that can let you sail through MB7-514 test with no mistakes. Missing the chance, I am sure you must regret it. Thus, don't hesitate and act quickly.
Exam Code: MB7-514
Exam Name: Microsoft (NAV 5.0 C/SIDE Introduction)
One year free update, No help, Full refund!
Total Q&A: 104 Questions and Answers
Last Update: 2014-02-05
MB7-514 Free Demo Download: http://www.itcertking.com/MB7-514_exam.html
NO.1 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft braindump MB7-514 MB7-514 test
NO.2 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft braindump MB7-514 MB7-514 test
NO.3 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.4 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft braindump MB7-514 MB7-514 test
NO.5 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft braindump MB7-514 MB7-514 test
NO.6 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft braindump MB7-514 MB7-514 test
NO.7 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.8 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.9 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft braindump MB7-514 MB7-514 test
NO.10 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.11 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.12 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft braindump MB7-514 MB7-514 test
NO.13 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.14 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft braindump MB7-514 MB7-514 test
NO.15 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft braindump MB7-514 MB7-514 test
NO.16 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.17 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.18 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft braindump MB7-514 MB7-514 test
NO.19 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft braindump MB7-514 MB7-514 test
NO.20 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft braindump MB7-514 MB7-514 test
ITCertKing offer the latest HP2-E59 exam material and high-quality 3103 pdf questions & answers. Our NS0-145 VCE testing engine and 700-410 study guide can help you pass the real exam. High-quality 74-335 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/MB7-514_exam.html
没有评论:
发表评论