Best CompTIA RF0-001 test training guide

ITCertKing's CompTIA RF0-001 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of ITCertKing, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.

ITCertKing CompTIA RF0-001 exam study guide can be a lighthouse in your career. Because it contains all RF0-001 exam information. Select ITCertKing, it can help you to pass the exam. This is absolutely a wise decision. ITCertKing is your helper, you can get double the result, only need to pay half the effort.

Exam Code: RF0-001
Exam Name: CompTIA (RFID+ Certification)
One year free update, No help, Full refund!
Total Q&A: 162 Questions and Answers
Last Update: 2013-10-13

ITCertKing IT expert team take advantage of their experience and knowledge to continue to enhance the quality of exam training materials to meet the needs of the candidates and guarantee the candidates to pass the CompTIA certification RF0-001 exam which is they first time to participate in. Through purchasing ITCertKing products, you can always get faster updates and more accurate information about the examination. And ITCertKing provide a wide coverage of the content of the exam and convenience for many of the candidates participating in the IT certification exams except the accuracy rate of 100%. It can give you 100% confidence and make you feel at ease to take the exam.

ITCertKing is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need ITCertKing's CompTIA RF0-001 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the ITCertKing CompTIA RF0-001 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.

RF0-001 Free Demo Download: http://www.itcertking.com/RF0-001_exam.html

NO.1 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D

CompTIA exam prep   RF0-001   RF0-001 practice test   RF0-001 answers real questions

NO.2 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A

CompTIA   RF0-001   RF0-001 original questions   RF0-001 questions   RF0-001 exam prep

NO.3 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD

CompTIA practice test   RF0-001   RF0-001 exam   RF0-001

NO.4 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B

CompTIA   RF0-001 exam dumps   RF0-001   RF0-001 test

NO.5 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C

CompTIA   RF0-001   RF0-001 dumps

NO.6 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B

CompTIA   RF0-001   RF0-001 exam prep   RF0-001 exam prep

NO.7 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A

CompTIA   RF0-001   RF0-001 braindump   RF0-001

NO.8 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A

CompTIA   RF0-001 exam simulations   RF0-001   RF0-001

NO.9 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D

CompTIA   RF0-001   RF0-001 test answers   RF0-001 exam prep

NO.10 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C

CompTIA exam dumps   RF0-001   RF0-001   RF0-001   RF0-001

NO.11 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A

CompTIA   RF0-001 practice test   RF0-001   RF0-001

NO.12 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A

CompTIA   RF0-001 practice test   RF0-001 practice test   RF0-001

NO.13 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B

CompTIA   RF0-001   RF0-001 pdf   RF0-001 dumps

NO.14 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B

CompTIA certification   RF0-001 exam prep   RF0-001 exam dumps   RF0-001   RF0-001 test answers

NO.15 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C

CompTIA certification training   RF0-001 test answers   RF0-001   RF0-001 demo   RF0-001

NO.16 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC

CompTIA certification   RF0-001   RF0-001 certification   RF0-001 exam simulations   RF0-001   RF0-001 answers real questions

NO.17 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B

CompTIA questions   RF0-001 exam simulations   RF0-001 certification   RF0-001 dumps   RF0-001 exam simulations

NO.18 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD

CompTIA   RF0-001   RF0-001 exam prep   RF0-001   RF0-001

NO.19 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C

CompTIA   RF0-001 exam   RF0-001 test   RF0-001 study guide   RF0-001

NO.20 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C

CompTIA   RF0-001   RF0-001   RF0-001 braindump   RF0-001 original questions

ITCertKing offer the latest 70-481 exam material and high-quality 700-104 pdf questions & answers. Our 74-344 VCE testing engine and 000-318 study guide can help you pass the real exam. High-quality HP2-N43 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/RF0-001_exam.html