HP certification HP2-T11 exam questions and answers come out

Add ITCertKing's products to cart now! You will have 100% confidence to participate in the exam and disposably pass HP certification HP2-T11 exam. At last, you will not regret your choice.

ITCertKing is a very good website to provide a convenient service for the HP certification HP2-T11 exam. ITCertKing's products can help people whose IT knowledge is not comprehensive pass the difficulty HP certification HP2-T11 exam. If you add the HP certification HP2-T11 exam product of ITCertKing to your cart, you will save a lot of time and effort. ITCertKing's product is developed by ITCertKing's experts' study of HP certification HP2-T11 exam, and it is a high quality product.

Exam Code: HP2-T11
Exam Name: HP (Industry Standard)
One year free update, No help, Full refund!
Total Q&A: 142 Questions and Answers
Last Update: 2013-09-28

As a main supplier for IT certification exam training. ITCertKing's IT experts continually provide you the high quality product and a free online customer service, but also update the exam outline with the fastest speed.

In the era of rapid development in the IT industry, we have to look at those IT people with new eyes. They use their high-end technology to create many convenient place for us. And save a lot of manpower and material resources for the state and enterprises. And even reached unimaginable effect. Of course, their income must be very high. Do you want to be the kind of person? Do you envy them? Or you are also IT person, but you do not get this kind of success. Do not worry, ITCertKing's HP HP2-T11 exam material can help you to get what you want. To select ITCertKing is equivalent to choose a success.

HP2-T11 Free Demo Download: http://www.itcertking.com/HP2-T11_exam.html

NO.1 How does the operation of RAID memory differ from RAID 5 disk storage? (Select three)
A. Data is written sequentially to all banks of memory
B. Data is written simultaneously to all banks of memory
C. Existing parity information must be read before calculating the new parity value
D. There is no need to read the existing parity before calculating a new parity value
E. The memory controller writes parity information to a dedicated parity bank of DIMMs
Answer: BDE

HP   HP2-T11 certification training   HP2-T11 study guide   HP2-T11 answers real questions   HP2-T11

NO.2 What is the maximum number of nodes supported in a Fibre Channel Switched Fabric (FC-SW)
environment?
A. 125
B. 126
C. 15 million
D. 16 million
Answer: D

HP   HP2-T11 original questions   HP2-T11   HP2-T11

NO.3 Which statements apply to AMD 2P or 4P system architecture? (Select three )
A. Each processor can access only its own memory
B. Requests for memory access are handled by the Northbndge ASIC
C. Each processor can access the full complement of installed memory
D. Memory must be installed in banks corresponding to the installed processors
E. The maximum amount of memory can be installed, regardless of the number of installed processors
F. Requests for memory access are handled directly by the corresponding processor and relayed through
the HyperTransport lnk
Answer: ADF

HP pdf   HP2-T11 original questions   HP2-T11   HP2-T11

NO.4 In systems with AMD processors, what allows communication between processors and the I/O
subsystem?
A. APIC
B. Northbridge
C. Southbridge
D. HyperTransport lnk
Answer: D

HP dumps   HP2-T11 answers real questions   HP2-T11 dumps   HP2-T11

NO.5 Which statement is correct when comparing similar versions of Intel Xeon and AMD Opteron
processors'?
A. Xeon processors are optimized for parallel execution
B. Opteron processors are optimized for parallel execution
C. Opteron processors use a Northbridge that operates at core bus speed
D. Xeon processors use an integrated memory controller that operates at core processor speed
Answer: B

HP   HP2-T11 exam dumps   HP2-T11 exam prep

NO.6 What is a characteristic of Double Data Rate (DDR) RAM?
A. sends data every other clock cycle
B. sends data on the rising edge of the clock cycle only
C. sends data on the falling edge of the clock cycle only
D. sends data on both the rising and falling edge of each clock cycle
Answer: D

HP demo   HP2-T11   HP2-T11

NO.7 A customer asks you for information about the advantages of RAID 6 over other RAID levels What can
you recommend? (Select three)
A. Performance is equivalent to RAID 5 when reading data.
B. It is the most cost-effective of the fault-tolerant RAID solutions.
C. lt has greater faulttolerancethan RAID4, RAID 1+0, or RAID5.
D. It uses the most storage capacity for fault tolerance of all the RAID levels.
E. it is ideal for applications requiring large logical drives with many physical drives.
Answer: ACE

HP test answers   HP2-T11   HP2-T11   HP2-T11

NO.8 Which RAID implementation allows for simultaneous failure of multiple drives?
A. RAIDO
B. RAID 4
C. RAID 5
D. RAID 6
Answer: D

HP demo   HP2-T11 original questions   HP2-T11   HP2-T11   HP2-T11 test questions

NO.9 Which system architecture is displayed?
A. Dual Peer I/O Bus (DPIO)
B. Triple Peer I/O Bus (TPIO)
C. Highly Parallel System Architecture (HPSA)
D. Memory and I/O Controller Architecture (MIOC)
Answer: C

HP demo   HP2-T11   HP2-T11 exam

NO.10 Which statement best describes PCI Express architecture?
A. Data is sent in parallel
B. Data is sent serially over each link
C. PCI Express has more pins than PCI-X
D. PCI Express transfers data in half-duplex
Answer: B

HP   HP2-T11 original questions   HP2-T11

NO.11 What is the difference between single-ended SCSI and differential SCSI?
A. Single-ended uses twisted pair wires
B. Differential is more susceptible to noise
C. Differential uses a single signal wire and has length limitations
D. Single-ended uses a single signal wire and has length limitations
Answer: D

HP   HP2-T11 exam dumps   HP2-T11   HP2-T11 exam

NO.12 Which backup type would you recommend if a customer environment requires saving the latest
version of each file?
A. full
B. copy
C. differential
D. incremental
Answer: D

HP exam   HP2-T11 original questions   HP2-T11   HP2-T11   HP2-T11 practice test

NO.13 What is a characteristic of a PCI-X-based bus?
A. You cannot use PCI-X cards in a conventional PCI system
B. It is fully backward compatible with conventional PCI devices
C. You cannot use existing PCI devices in a PCI-X-based system
D. It is compatible with conventional PCI devices only after updating to newer drivers
Answer: B

HP exam prep   HP2-T11 braindump   HP2-T11 certification   HP2-T11   HP2-T11 braindump

NO.14 What happens if you install a 66MHz, 32-bit PCI card in a 33MHz, 64-bit PCI slot? (Select two)
A. The 66MHz card operates at 33MHz
B. The 66MHz, 32-bit card operates at 33MHz in 32-bit mode
C. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode
D. Any 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards
Answer: AB

HP demo   HP2-T11   HP2-T11 dumps   HP2-T11 test   HP2-T11

NO.15 What best describes PCI-X architecture?
A. 32-bit bus that runs at speeds of up to 66MHz
B. 64-bit bus that runs at speeds of up to 66MHz
C. 64-bit bus that runs at speeds of up to 133MHz
D. 32-bit bus that runs at speeds of up to 133MHz
Answer: C

HP   HP2-T11   HP2-T11   HP2-T11 demo   HP2-T11 practice test

NO.16 The system administrator typically performs a full backup every Monday and incremental backups on
Tuesdays, Wednesdays, and Thursdays In addition, full backups are performed at the end of the week
and at the end of the month
Which GFSterm refers to the monthly full backup?
A. son
B. sister
C. father
D. grandfather
Answer: D

HP   HP2-T11   HP2-T11 pdf   HP2-T11   HP2-T11 original questions

NO.17 What is an advantage of using iSCSI?
A. it enables the use of SCSI cables for Ethernet communications
B. it enables the use of SAS and SATA drives using standard SCSI controllers
C. It overcomes the inability to use shared storage devices in a heterogeneous environment
D. It overcomes the distance limitations associated with standard Fibre Channel storage transport
Answer: A

HP dumps   HP2-T11   HP2-T11   HP2-T11   HP2-T11 dumps

NO.18 Serial Attached SCSI (SAS) technology uses the same electrical and physical interface as which
technology?
A. IDE
B. ATA
C. iSCSI
D. SATA
Answer: D

HP exam simulations   HP2-T11 certification   HP2-T11 test questions   HP2-T11   HP2-T11

NO.19 In systems with AMD processors, what allows communication between processors and the I/O
subsystem?
A. APIC
B. Northbridge
C. Southbridge
D. HyperTransport lnk
Answer: D

HP   HP2-T11   HP2-T11   HP2-T11 test questions   HP2-T11 questions   HP2-T11

NO.20 A customer has an existing mission critical database application using approximately 20TB of network
storage and plans to add a web server component to the existing environment to increase the storage by
50% Which tape storage technology would you recommend?
A. Autoloader
B. Travan Tape System
C. business-class library
D. enterprise-class library
Answer: C

HP exam prep   HP2-T11 certification   HP2-T11   HP2-T11   HP2-T11 certification

ITCertKing offer the latest 646-048 exam material and high-quality 74-344 pdf questions & answers. Our 000-585 VCE testing engine and 70-489 study guide can help you pass the real exam. High-quality 70-481 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP2-T11_exam.html